Rattle Can Paint Job Rifle

My main question is about clear coating. College student rifle with rattlecan paint job.

Pin On Airsoft

Well i have been wanting to do this for a while and finally got my rifle just where i wanted it so i figured wth.

Rattle can paint job rifle. A rattle can paint job.it's all in how you prep it and spray it. Set up a raking shop light and watch for the paint and solvent to level out together and hit the wet look. So post your pics of your rattle can paint job.so i can get some idea's.

Its not very time consuming, and it is fairly inexpensive. Its like a green scotchguard pad but red and about 400 grit. Rattlecan camouflage rifle photo gallery.

There are other, more durable treatments that can be used for your rifles (and other firearms), such as cerakote or duracoat, but these require special measures such as baking the finish on, which entails stripping down the firearms and jumping through all sorts of hoops. Ideally needs fo be heat resistant to help prevent itself as. I'm getting ready to paint my jeep and have heard of people spraying them with krylon.

All factory, except for this hideous paint job. A couple of our rattle canned ars. Rattle can has held up for me on several rifles (4).make sure its clean before you paint.of course.another good tip is heat the (paint) can up to about 90 degrees for 5 minutes or so (boiled water works the best).apply multiply thins coats for best results.

Clear coated over top of the camo job. There are some great examples/instructions/material lists in the sponge and pinestraw camo threads at. The purpose of using simple rattle cans is in.

Sooo, as i'm new to long range shooting, this rifle isn't set up for long range. Rustoleum is on the right track, but textured paint is going to. Shake up that rattle can, and go to work.

The entire body, frame, and hard top are painted with a rattle can. Prime with spraymax 2k primer let dry a coupl days, then block with your 150/180 grit. After its cured a few days scuff it a little with a red pad.

If this isn't interesting to you, i won't take offense. Spraying the black stock directly. Ive seen some pretty nice rattle can paint jobs.

Before i painted, i sprayed them with a product i got at the auto supply store that you can apply to metal, polymer and plastics to help the paint adhere better to the surface. There are other ways to paint a rifle, too. There is some rustoleum brown and black in there as well.

Yes, prime it,either with white, or a color lighter. February 25, 2015 / walter. I taped off the lens of my light and the trigger the mag setting on the scope and the on/off switch on the scope and flashlight.

I bought a used remington 700 in 7rum. Then i painted, and finally over sprayed with a matte clear finish also from the auto store to protect the paint better from chips,. Im currently painting my blazer and doing the good ol trusty rattle can style paint job.

It had to be fixed. #5 · nov 8, 2016. Take your hairdryer and use it on the rifle for one to two minutes.

Some time ago, i watched a youtube video by theprorancher in which he instructed the viewer on one way to do a cheap, effective camouflage job using krylon spray paints. Rattle can jobs for the. I have a total of $60 in that paint job, and if i get some rock or tree rash, all i need is a $7 can of paint for a touch up.

Than the one you're going to use. Spray in a parallel line, not a curved arc. The handles that snap on the rattle can helps a bunch.

Rattle up the basecoat paint can ball bearing for at least a minute and then lay it down. Once you have a good first coat on itâ€™s time to unleash your feminine side once again. Start with 80grit and blocks, i use lexan and acrylic sticks.

Welcome to the ftf from the swamp north of the swamp. Commonly called in the hobby as rattle canning, this is a great way to give your rifle some flair and style on the cheap! If playback doesn't begin shortly, try.

The best thing you can do to prep yourself for this is to lower your expectations and accept the fact that nothing is perfect and the paint will wear off to some degree. Ar 15 rattle can spray paint job with rustoleum using camo colors. Discussion starter · #1 · oct 16, 2007.

I used a mix of krylon camo khaki, green, and brown. Stock will be pretty straight at this point. With the finish coat doesn't work out so well.

After proper prep work and the proper environment to spray paint, the key is uniform paint thickness (mills) achieved by one person doing the painting, knowing basic painting techniques and following the manufacturers directions. Who makes the best glossy clear coat canned spray paint. I did just a magpul pistol grip and an a1 stock using krylon camo paint.

Just swap the flashlight and you’ll be fine. Don’t worry, painting your rifle isn’t hard or scary. It provides a protective layer of paint to your weapons and other gear, and helps you move past the “it looks so nice, i’m afraid to scratch it phase” of ownership.

And if you look closely, it shines just as good as if it were sprayed with a paint gun. 4 any rattle can job other than alumahyde can be made more durable with a good coat or two of matte clear. I followed his method, and though i don’t think i did as good of a job as he did, i’m happy with the way mine.

For the price of a can of spray paint or a few cans of spray paint and some time and basic materials you can get all kinds of creative with your ar. Remember to hold the can 10+ inches from your rifle to prevent dripping. My jeep is a beater and i don't want to spend big money painting it.

I certainly don’t recommend doing this to a $2,000+ ar, but a cheap range.

Pin On Firearms